Table of Contents
Advertisement
STB6684/A Operation Manual
Operational steps for the bar scale setting:
1) Move the cursor to BAR SCALE, the following items will be displayed in the softkey
zone:
↑(+)
This softkey is used to increase the bar scale number ranging from 0 to 8.
↓(-)
This softkey is used to decrease the bar scale number ranging from 0 to 8.
2） User can input the desired bar scale number by numeric keys and press [ENTER] to
end inputting.
———————————————————————————————
NOTE: Switching the output result (resistance or current), the bar scale number will reset
to 0, that is to select the scale automatically.
———————————————————————————————
3.3.2 FILE
See 5.2 for details about the <FILE MANAGE> function.
3.4 SEQUENCE DISP
Press [DISP] and select SEQUENCE DISP to enter into the <SEQUENCE DISP> page
shown in figure 3-4.
Chapter 3 [DISP]
◇ 22
Advertisement
Table of Contents
