STB6684/A Operation Manual
Chapter 8 Remote Control
Figure 0-4
When user is using USBTMC interface, labview software can be used to access the instrument.
8.4 USBCDC virtual serial port
When "USBCDC" is selected, the USB interface can be configured as a virtual serial port (VCom).
8.4.1 System configuration
Connect PC and STB6684/STB6684A to the USB interface through a USB cable.
8.4.2 Install drive
The method of installing USBCDC drive is the same as that of USBTMC,but when selecting
driving file, select the path of usbVCom.inf,as Figure 0-5.
◇ 97