Table of Contents
Advertisement
STB6684/A Operation Manual
In the <BARGRAPH SETUP> page, the following control parameters can be set in this
page:
BAR SCALE
FILE
4.3.1 BAR SCALE
There are two bar scale setups: RES (resistance) and CURR (current).
In CURR mode, the setting range is from 0 to 8.
0 ： AUTO SCALE
1 ： 1pA – 100pA
2 ： 10pA – 1nA
3 ： 100pA – 10nA
4 ： 1nA – 100nA
5 ： 10nA – 1uA
6 ： 100nA – 10uA
7 ： 1uA – 100uA
8 ： 10uA – 1mA
In RES mode, the setting range is from 0 to 10.
（Select the serial number）
(automatically select the scale)
◇ 36
Chapter 4 [SETUP]
Advertisement
Table of Contents
