Lcd Style; Pass Beeper; Fail Beeper - Saluki STB6684 Operation Manual

STB6684/A Operation Manual
This softkey is used to decrease contrast.

5.1.2 LCD Style

In this zone, the LCD style is controlled.
Operational steps for setting the LCD style:
Move the cursor to LCD STYLE, the following softkeys will be displayed:
CLASSIC
This softkey is used to set the LCD style to classic display mode.
DEFAULT
This softkey is used to set the LCD style to default mode.

5.1.3 Pass beeper

Set the pass beep mode.
Operational steps for setting the pass beeper:
Move the cursor to PASS BEEP, the following softkeys will be displayed:
HIGH LONG
This softkey is used to set a high and long beep.
HIGH SHORT
This softkey is used to set a high and short beep.
LOW LONG
This softkey is used to set a low and long beep.
TWO SHORT
This softkey is used to set two short beep.
OFF
This softkey is used to turn off pass beeper.

5.1.4 Fail beeper

Set the fail beep mode.
Operational steps for setting the pass beeper:
。Move the cursor to FAIL BEEP, the following softkeys will be displayed:
HIGH LONG
◇ 62
Chapter 5 [SYSTEM]