STB6684/A Operation Manual
9.5.11 Mass MEMory subsystem commands
Mass MEMory subsystem commamds are used to save and load files.
Command tree:
Mass MEMory
The :LOAD:STATe command loads the stored file.
Command syntax: MMEMory:LOAD:STATe <value>
Where,
<value>
For example: WrtCmd("MMEM:LOAD:STAT 1");
The :STORe:STATe command saves the current setting file.
Command syntax: MMEMory:STOR:STATe <value>
Where,
<value>
For example: WrtCmd("MMEM:STOR:STAT 1");
:LOAD
:STATe <record number>
:STORe
:STATe <record number>
0 to 9(NR1): serial number of file
0 to 9(NR1): serial number of file
◇ 116
Chapter 9 Command Reference