Seqcont Subsystem Commands - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

9.5.15 SeqCONt subsystem commands

SeqCONt subsystem commands set parameters in the sequence content page.
SeqCONt :USER1
:USER2 :1
:USER3 ...
:USER4 :1
The :USER1 / USER2 / USER3 / USER4:DELete command deletes sequence.
Command syntax:
SeqCONt : :<USER1 /USER2 /USER3 /USER 4> ：<NO.> ：DELete
For example: WrtCmd ("SeqCONt : :USER1:1:DELete"); delete the contents of 1 in USER1.
The :USER1 / USER2 / USER3 / USER4:NTSert command insert a blank line before a sequence.
Command syntax:
:1 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
:2 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
...
:18 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
:2 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
...
:18 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
:2 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
...
:18 DELete
INTSert
<item>,<hv>,<rang>,<avg>,<low>,<upp>,<time>
◇ 124
Chapter 9 Command Reference