Table of Contents
Advertisement
STB6684/A Operation Manual
be displayed in the softkey zone when the numerical keys are used to input the voltage.
Pressing the corresponding softkey, the voltage unit can be selected and the data will be
confirmed. When [ENTER] is pressed to finish the data input, the default voltage unit is V.
3.1.4 I2_MAX
This function is used to set the maximum charge current allowable by HV2. Three currents
are selectable: 2mA, 25mA and 200mA.
Operational steps for the I2_MAX setting:
1）Move the cursor to I2_MAX, the following items will be displayed:
2 mA
25 mA
200 mA
2）Press one of above softkeys to set the charge current.
3.1.5 SPEED
Following factors decide the measurement speed of STB6684/A:
Integration time (A/D conversion)
Average times (Average test times)
Measurement delay time (the time from instrument start-up to test starting)
Display time of test result
At slow speed, the measurement results are generally much more stable and accurate.
Three measurement speed are selectable: FAST, MED and SLOW.
Operational steps for the measurement speed setting:
1）Move the cursor to SPEED, the following items will be displayed in the softkey zone:
FAST
MED
SLOW
2）Press one of above softkeys to set the measurement speed.
Chapter 3 [DISP]
◇ 15
Advertisement
Table of Contents
