Fetch? Subsystem Commands - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

9.5.18 FETCh? subsystem commands

FETCH? subsystem commands set STB6684 to output a measurement
result. Command tree:
FETCh [:IMP]?
:SMONitor
The [:IMP]? command output the last measurement result to the output buffer zone of STB6684.
Query syntax: FETCh[:IMP]?
For example: WrtCmd("FETC?");
The returned value:
Good contact:
RN HIGH / RN LOW / 1.000K / R ,%+12.5E , /I,%12.5E,
Test result
Bad contact:
NO CONTACT
The :SMONitor:VDC? command displays the current test voltage.
Query syntax: FETCh:SMONitor:VDC?
The returned value:
%+12.5E, %+12.5E
Test voltage
Charge voltage
:VDC?
◇ 129
Chapter 9 Command Reference
(SN ) + NL^END
Bin number