Barsetup Subsystem Commands - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

9.5.17 BARSetup subsystem commands

BARSetup subsystem commands set parameters in the bar graph setup page.
BARSetup / BARDisp
The : BarSCAle command sets the bar scale of the bar graph display page.
The BARSetup: BarSCAle? query returns the current bar scale.
Command syntax:
: BarSCAle
———————————————————————————————————————
NOTE: In CUR mode, <NR1> ranges from 0 to 8.
In RES mode, <NR1> ranges from 0 to 10.
———————————————————————————————————————
For example: WrtCmd("BARSetup: BarSCAle 0"), set 0 as the bar scale.
Query syntax: BARSetup: BarSCAle?
Return format:
<NR1> + <NL^END>
:BarSCAle <NR1>
<NR1>
◇ 128
Chapter 9 Command Reference