Table of Contents
Advertisement
STB6684/A Operation Manual
7
RS232C
8
DEVICE
9
SCANNER
10
HANDLER
11
Lable plate
2.3 Display zone
STB6684 adopts a 320×240 dot-matrix LCD. The display screen is divided into
the following zones, as shown in figure 2-3.
Chapter 2 Introduction to Front and Rear Panels
Provide the universal serial communication
interface for instrument and external device. All
parameter setup and command are set and
obtained by computer to realize the remote
control.
PC can control STB6684 through the
USB DEVICE interface.
The instrument can connect with a multi-channel
scanner through this interface to realize a
multi-channel test.
An automatic test system can be conveniently
constructed via this interface to fulfill automatic
tests. The instrument outputs bin compare result
signals and handshake signals, meanwhile a
"start-up" signal will also be sent to the
instrument via it.
Record the date, model, manufacturer, etc.
◇ 7
Advertisement
Table of Contents
