Table of Contents
Advertisement
STB6684/A Operation Manual
0 ： AUTO SCALE
1 ： 10kΩ - 1 MΩ
2 ： 100kΩ - 10 MΩ
3 ： 1MΩ - 100 MΩ
4 ： 10MΩ - 1GΩ
5 ： 100MΩ - 10GΩ
6 ： 1GΩ – 100GΩ
7 ： 10GΩ – 1TΩ
8 ： 100GΩ – 10TΩ
9 ： 1TΩ – 100TΩ
10 ：10TΩ – 1PΩ
Operational steps for setting bar scale:
1) Move the cursor to BAR SCALE, the following softkeys will be displayed:
↑(+) This key is used to increase the serial number of bar graph.
↓(-)
This key is used to decrease the serial number of bar graph.
3)
The numerical keys can be used to input the serial number of bar graph. [ENTER] is
used to confirm inputting.
————————————————————————————————————
NOTE: When the output result (resistance or current) is toggled, the serial number of bar
scale will reset to 0 (auto scale).
————————————————————————————————————
4.3.2 FILE
See 5.2 for details about the <FILE MANAGE> function.
4.4 SEQUENCE SETUP
Press [SETUP], and then SEQ. SETUP to enter into the <SEQUENCE SETUP> page.
Figure 4-4:
(automatically select the scale)
◇ 37
Chapter 4 [SETUP]
Advertisement
Table of Contents
