Table of Contents
Advertisement
STB6684/A Operation Manual
4)
Press USBTMC to select USBTMC interface bus.
5)
Press USBCDC to select USBCDC interface bus.
5.1.9 GPIB address
Set the GPIB interface bus address.
Operational steps for setting the bus address:
Move the cursor to GPIB ADDR, the following softkeys will be displayed:
↑（+）
This softkey is use to increase the native GPIB address.
↓（-）
This softkey is use to decrease the native GPIB address.
5.1.10 Baud rate
Set the baud rate on a specified RS232 interface ranging from 9.600k to 115.200k.
Operational steps for setting the baud rate:
Move the cursor to BAUD RATE, the following softkeys will be displayed:
↑（+）
This softkey is used to increase the native baud rate.
↓（-）
This softkey is used to decrease the native baud rate.
5.1.11 Time
Set the correct local time.
For example: 9 o'clock 13 minute and 25 second a.m. on June 19, 2011 will be shown as
11-06-19 09:13:25.
Input the time by numerical keys and press [ENTER] to confirm.
Pressing the right and the left arrow keys on the keyboard, the cursor will toggle among
different time zones.
◇ 65
Chapter 5 [SYSTEM]
Advertisement
Table of Contents
