Scpi Commands; System Commands; Display Subsystem Commands - Saluki STB6684 Operation Manual

STB6684/A Operation Manual

9.5 SCPI commands

9.5.1 System commands

●DISPlay ●MesSETup
●HUMReject ●CCHEck
●LIMIt ●Mass MEMory ●UserADJust
●SEQSetup ●SeqCONt

9.5.2 DISPlay subsystem commands

DISPlay subsystem commands are mainly used to set the display page for the instrument.
The :DISPlay? query returns the current page.
When the instrument is in test mode and high voltage exists, no input to the display page is
permitted.
Command tree:
DISPlay
The :PAGE command sets the display page.
The DISPlay:PAGE? query returns the current page.
●TRIGger
●MESTb
●SCANSetup
:PAGE
MEASuredisp
BINDisp
BARDisp
SEQDisp
XYDIsp
SCAnDisp
MSETup
LTABle
BARSetup
SSET
SeqCONtent
XYSeTup
SCanSeTup
UserADJust
SYSTem
FLISt
:LINE "<string>"
:RFONt LARGe
TINY
OFF
___:Mode I / CUR
R / RES
◇ 104
Chapter 9 Command Reference
●HTOUtput
●MEER
●XYGRaph