STB6684/A Operation Manual
4.8 USER ADJUST
Press [SETUP], and then MORE 1/2 and USER ADJUST to enter into the <USER ADJUST>
page.
Figure 4-8:
In this page, the following parameters can be set:
OPEN CORR
■
Current range for open correction (1mA...)
■
■
LOAD CORR
■
REFERENCE
■
FILE
4.8.1 OPEN CORR:ON/OFF
This function sets whether to take the open correction value into account when the measure is
taken..
OPEN CORR: ON
Take the open correction value into account.
OPEN CORR: OFF Do not take the open correction value into account.
Chapter 4 [SETUP]
◇ 58