Set Time; Y-Scale; Cur Scope - Saluki STB6684 Operation Manual

STB6684/A Operation Manual
2) Use above softkeys to set the x-scale.

4.6.2 SET TIME

When the X-SCALE is selected as time, this function can set the total test time.
Time range: 1 – 1000s
Operational steps for selecting the time:
1）Move the cursor to SET TIME, the following softkeys will be displayed:
↑（+）
This softkeys is used to increase the total test time by 1s.
↓（-）
This softkey is used to decrease the total test time by 1s.
2） Use above softkeys to set the total test time, or numerical keys and [ENTER] to input the
time. By the latter way, the default unit will be s.

4.6.3 Y-SCALE

Operational steps for setting the Y-scale:
1）Move the cursor to Y-SCALE, the following softkeys will be displayed:
RES
CUR
2) Use above softkeys to set the Y-scale.

4.6.4 CUR SCOPE

Current scope shows the maximum current display range.
Operational steps for setting the current scope:
1) Move the cursor to CUR SCOPE, the following softkeys will be displayed:
Chapter 4 [SETUP]
◇ 53