Setup; System; Basic Operations - Saluki STB6684 Operation Manual

Insulation resistance meter

Table of Contents

STB6684/A Operation Manual

2.4.2 SETUP

Press this key to enter into MEASURE SETUP. The following items will be displayed in the

page:

<MEAS. SETUP>

<BAR. SETUP>

<SEQ. SETUP>

Press this key to enter into SYSTEM SETUP. Fuctions such as system setup and file list can

be started in this page. The following item will be displayed:

Basic operations for STB6684 are as follows :

Press [DISP], [SETUP] or [SYSTEM] and select softkeys to enter into the desired page

to display (see figure 2-5).

Move the cursor to the desired zone to set by pressing [←], [↑], [→] or [↓]. The selected

zone will be displayed with highlight.

Softkey functions corresponding to the currently selected zone will be displayed in the

softkey zone. User can choose the desired function by pressing a softkey. Numerical keys,

[BACKSPACE] and [ENTER] are used to input data.

Once a numerical key is pressed, unit softkeys that can be used will be displayed in the

softkey zone. You can press the unit softkey or [ENTER] to finish inputting. When

[ENTER] is pressed to finish inputting, the unit will be the defaut unit corresponding to

the current parameter, such as S, V or A.

Chapter 2 Introduction to Front and Rear Panels

◇ 9

Table of Contents

Stb6684a