Seq. Content - Saluki STB6684 Operation Manual

STB6684/A Operation Manual
Chapter 4 [SETUP]

4.5 SEQ. CONTENT

Move the cursor to a default or user sequence, press SCAN or EDIT to enter into the <SEQ.
CONTENT> page.
Figure 4-5:
This page is used to edit the current user sequence, and up to 18 steps can be set.
Following items can be set: (1) NO., (2) ITEM, (3) HV, (4)RANG, (5)AVG, (6)LOW, UPP,
(7)TIME.
————————————————————————————————————
NOTE: DEFAULT SEQ. are automatically generated in accordance with settings of
<MEASURE DISP> or <MEASURE SETUP>.
USER SEQ. are set in this page and not concerned with <MEASURE SETUP> and
<LIMIT SETUP>.
————————————————————————————————————
◇ 41