STB6684/A Operation Manual
4.4.3 USER SEQ.
User sequences are ones edited by user. At any time, user can change any parameter.
There are 4 user sequences:
USER1 SEQ.
USER2 SEQ.
USER3 SEQ.
USER4 SEQ.
Above sequences have functions of EIDT, COPY, PASTE and CLEAR.
User can set 18 timing steps at most.
Operational steps for setting user sequence:
1)Move the cursor to USER SEQ., the following softkeys will be displayed.
EDIT
Press EDIT to enter into the <SEQ. CONTENT> page. Parameters in this page can
be set, see 4.5 <SEQ. CONTENT> .
COPY
Press this key, the instrument will copy all parameters in the current page to the
memory, but only the latest parameters can be copied.
PASTE
Press this key, all parameters under this user sequence will be covered by that
stored in the memory.
CLEAR
Press this key to clear all contents under the current user sequence.
4.4.4 FILE
See 5.2 for details about the <FILE MANAGE> function.
Chapter 4 [SETUP]
◇ 40