Connecting An Scp Card To An Snmp Management System; Connecting An Mcp To An Snmp Management System - Paradyne 8820 Installation Manual

Connecting an SCP Card to an SNMP Management System

Procedure
To connect an SCP card to an SNMP management system:

Connecting an MCP to an SNMP Management System

Procedure
To connect an MCP card to an SNMP management system, or for Telnet access to
the MCP card:
8820-A2-GN20-80
1. Plug an 8-pin modular cable into LAN SLOT A or B of the SIM, according to
which slot the SCP card is installed.
2. For a chassis with a redundant SCP card, a cable is required in both the LAN
SLOT A and LAN SLOT B jacks of the SIM.
LAN Slot A
CLOCK SERIAL AC
2 4
A MCP ALARM
B SERIAL ALARM
1 3
CLOCK SMCM
3. Dress the cable or cables to the right and through the cable retainer.
4. Plug the other end of the cable or cables into the 10/100BaseT hub connected
to the SNMP management system network.
1. Plug an 8-pin modular cable into LAN Slot 9 of the SIM, which corresponds to
the MCP card in Slot 9 of the chassis.
Slot 9
CLOCK SERIAL AC
2 4
A MCP ALARM
B SERIAL ALARM
1 3
CLOCK SCM
2. Dress the cable to the right and through the cable retainer.
3. Plug the other end of the cable into the 10/100BaseT hub connected to the
SNMP management system network.
November 2004
LAN Slot B
LAN SLOT
6 8 A 10 12 14 16 18
7 11 13 15
5 9 B 17
03-17434
LAN SLOT
6 8 A 10 12 14 16 18
5 7 9 B 11 13 15 17
00-16560-01
4. Cabling: Standard SIM
4-5