Settings Of Channel View Mode - Eneo INR-18N040005A Full User Manual

6.1.2 - Settings of Channel View Mode

1 – Click the add icon
go to the configuration page.
2 – Tick the checkbox of Enable of the channel(s)
you want to realize the counting. The Setup
& Alarm icon
camera in that channel supports AI function;
on the contrary if the camera doesn't support
AI function, the icon
3 – Set the Capacity number for each channel,
which is the maximum limitation of the
attendance.
4 – Click the Setup button
that you want to configure the detection
conditions. Check more on 5.4.1.5. CC (Cross
Counting Detection).
5 – Click the Alarm setup button
camera that you want to configure the alarm
actions when the Available number is 0.
• Buzzer: Set the buzzer duration in seconds
when the Available number is 0.
• Alarm Out: If your NVR support to connect to
external alarm device, you can set to emit an
alarm tone.
• Latch Time: To configure the external alarm
time when the Available number is 0.
Right click your mouse to exit the alarm setup
page, and then click Save button to save the
settings.
6 – Click Apply to save.
7 – Click the Channel View icon
live images & counting data of all activated
channels.
or setup icon
will be in blue color if the
will be in grey color.
of the camera
of the
to view the
to
EN
173