I/O Alarm - Eneo INR-18N040005A Full User Manual

5.3.3 - I/O Alarm

If your NVR or the connected camera has alarm input function, you will need to configure the settings to
make the connected sensor works probably.
Alarm In: Alarm input channel
• Local: Alarm input devices connected to NVR
• CHx<- 1: Alarm input devices connected to IP camera.
Alarm Type: There are 3 types for your choice: Normally Open, Normally Closed, and OFF. Choose the one
which is well-matched with your sensor, or choose OFF to close the sensor trigger function.
Buzzer: When IO Alarm is detected, you can enable the NVR's buzzer to alert you for a predetermined
amount of time. Click the drop-down menu to select a time.
Alarm Out: If your NVR or IP camera supports to
connect external replay output devices, the system
can send an alert message to the external alarm
devices. Click button, to choose the external
alarm devices:
Local: External alarm devices connected to the NVR.
CHx->1: External alarm devices connected to IP cameras.
Latch Time: To configure the external alarm time when the detection is triggered.
Record: This option instructs your NVR to trigger
additional cameras to start recording when motion
is detected. Click the drop-down arrow to choose
all channels to be recorded or not.
icon, click the Record Channel checkbox to enable recording. Click the checkbox in front of the
Click
channel number to select all channels or click on the individual camera number that you want to trigger
for recording.
EN
71