Table of Contents
Advertisement
Port
EN
http/https/rtsp: This is the port that you will use to log in remotely to the NVR (e.g. using the Web Client),
or the NVR will be allowed to transmit real-time streaming to other device (e.g. using a streaming Media
player.). The ONVIF is using the same port also.
If the default port 80 is already taken by another application, please change it.
Client: This is the port that the NVR will use to send information through (e.g. using the mobile app). If
the default port 9000 is already taken by other applications, please change it.
Internal Port: Mainly used for LAN connection.
External Port: Mainly used for WAN / Internet connection.
UPNP: If you want to log in remotely to the NVR using Web Client via different router/LAN, you need
to complete the port forwarding in your router. Enable this option if your router supports the UPnP. In
this case, you do not need to configure manually port forwarding on your router. If your router does not
support UPnP, make sure the port forwarding is completed manually in your router.
Mapping Strategy: If you want the port randomly distributed by the router UPnP server, choose Auto; If
you want to manually forwarded the port, choose Manual.
PPPoE: This is a protocol that allows the NVR to connect to the network directly via a DSL modem.
Tick the Enable PPPoE box, and then enter the User name & Password of the PPPoE which is provided by
your ISP.
19
Advertisement
Table of Contents
