Table of Contents
Advertisement
Buzzer: When alarm event is detected, you can enable the NVR's buzzer to alert you for a predetermined
amount of time. Click the drop-down menu to select a time.
Alarm Out: If your NVR or IP camera supports to
connect external replay output devices, the system
EN
can send an alert message to the external alarm
devices. Click
button, to choose the external
alarm devices:
Local: External alarm devices connected to the NVR.
CHx->1: External alarm devices connected to IP cameras.
Latch Time: To configure the external alarm time when the detection is triggered.
Record: This option instructs your NVR to trigger additional cameras to start recording when motion is
detected. Click the drop-down arrow to choose all channels to be recorded or not.
button, click the Record Channel
Click
checkbox to enable recording. Click the checkbox
in front of the channel number to select all
channels or click on the individual camera number
that you want to trigger for recording.
Post Recording: This option instructs your NVR to record for a set time after an event has occurred. For
most instances, the default selection will be suitable, however, you can change this if you wish.
Show Message: When the detection is triggered, the alarm icon
will appear on screen.
Send Email: An email alert will be sent when alarm event is detected. Click the checkbox if you want to
disable this.
FTP Picture Upload: Click the checkbox to copy snapshots to your ftp server when the detection is
triggered.
FTP Video Upload: Click the checkbox to copy videos to your ftp server when the detection is triggered.
Picture to Cloud: Click the checkbox to copy snapshots to the cloud via Dropbox or Google Drive when
the detection is triggered.
Video to Cloud: Click the checkbox to copy videos to the cloud via Dropbox or Google Drive when the
detection is triggered.
Full Screen: Click the checkbox to view the camera full-screen in Live View mode when the detection is
triggered.
Voice Prompts: If your NVR connects with a speaker, you can select a customized alert voice when the
detection is triggered. See how to add customized alert voice on 5.3.9 Voice Prompts.
Copy: Use the Copy function to apply all settings to the other connected cameras.
Default: Click Default to revert to default settings.
Apply: Click Apply to save settings.
125
Advertisement
Table of Contents
