Eneo INR-18N040005A Full User Manual page 95

5.4.1.9 - LPD (License Plate Detection)
License Plate Detection function, also called "Automatic License/Number Plate Recognition (ANPR)",
helps to detect and record the license plate number.
Switch: To enable or disable the crowd density detection function.
Setup: Click
to configure the detection conditions.
1. Choose a channel you want to set.
2. Select how snapshots containing a recognized license plate will be captured. This can affect the
number of license recognition notifications that you will receive:
• Default Mode: a single, best snapshot of the license plate is captured.
• Realtime Mode: the camera tracks and captures the license plate of vehicle entering and leaving
the detection area. You'll get two notifications in the Alarm Notification Panel - once when the
license plate is first detected and again as the vehicle leaves the detection area. This is useful if you
want to continuously monitor the vehicle's presence in an area and get alerts in real-time.
• Interval Mode: you can specify the number of snapshots to take and the time interval between
snapshots.
• Snap Num: the number of snapshots to take
• Snap Frequency: the time interval between snapshots
3. To set the minimum & maximum pixel of size of license plate.
4. Adjust the sensitivity level. The higher the number, the more sensitive the detection will be.
EN
95