Eneo INR-18N040005A Full User Manual page 66

5.2.3.2 - Capture Configuration
You must create a capture schedule so your NVR can take snapshots when an event has occurred or if
you want to take snapshots using a time interval (every 5 seconds, for example).
1. Choose a Channel you want to set.
2. Click on the mode radio button to choose one of the capture modes:
• Normal: A snapshot is taken according to the normal interval setting selected (every 5 seconds, for
example). Time slot will be marked green color for normal capture.
• Motion: A snapshot is taken during a motion alarm. Time slot will be marked yellow color for
motion detection capture.
• IO: Your NVR will only record when external sensor is triggered. Time slot will be marked red color
for normal recording.
• PIR: Your NVR will only record when PIR detection occurs. Time slot will be marked purple color for
normal recording.
3. Drag the cursor to mark the slots on the time table.
4. The set capture schedule is valid only for one channel. If you want to use the same schedule for
other channels, use Copy function.
5. If a time slot marked black means that there will be no capture at the time period.
6. Click Apply to save your settings.
66