Disk; Resolution - Eneo INR-18N040005A Full User Manual

4.1.4 - Disk

HDD must be formatted If it is installed in the NVR for the first time.
Select the HDD and then click Format HDD button to format the HDD.
Add NAS HDD: To add your NAS disk.
Record On e-SATA: If your NVR comes with an e-SATA port on the rear panel, you can enable to record
the video to e-SATA HDD. This function only available when your e-SATA HDD has been connected to the
NVR already.

4.1.5 - Resolution

Choose an output resolution matches to your monitor. The NVR supports to adjust the output resolution
automatically to match the best resolution of your monitor when the system is starting up.
24
Overwrite: This instructs your NVR to overwrite the
oldest video files as the hard drive becomes full.
You also have the option of selecting the amount
of days for recordings to be kept before they are
overwritten. For example, if you choose the option
7 days then only the last 7 days' recordings are
kept on the HDD.
To prevent overwriting any old recordings, select
OFF. If you have set Off on this feature, please
check the HDD status regularly to make sure the
HDD is not full. Recording will be stopped if HDD is
full. We recommended leaving the Auto selection
as this prevents your NVR from running out of
storage space.
If you connect to a 4K HDMI monitor, you are able
to choose max. 4K (3840x2160) resolution.
If you connect a VGA monitor, do not choose the
resolution larger than 1080P(1920x1080).