Table of Contents
Advertisement
5.1.4.1.2.6 - Pattern Scan
With the Tour function, you're able to configure maximum 4 tracks of auto cruise by choosing different
preset positions.
1 – Select Pattern Scan mode.
2 – Select a track. Maximum 4 tracks
available.
3 – Adjust the speed control to alter how fast
or slow the camera will pan or tilt.
4 – Click and hold the directional buttons
to move the camera in the direction
selected.
5 – Change the optical zoom, focus and iris of
the lens if needed.
6 – When the start position is fixed,
click
button to start recording.
Repeat step 4 & 5 to adjust the position.
Press
to finish the recording of route.
7 – Click
button, the camera will be
moved exactly same as the route which
was recorded in step 6, including zoom,
focus, direction.
Press
to stop.
52
4
3
5
2
6
7
1
Advertisement
Table of Contents
