Table of Contents
Advertisement
5.1.4.1.2.3 - Watch Mode
Watch mode allows the camera to perform a preset action when there is no any operation to the camera,
such as moving to a preset position, starting cruise, etc.
1 – Select the Watch Mode.
2 – Set the time interval. It means the length
of time that must elapse before the watch
mode is taken action. For example, the
watch mode is activated and the interval
is set to 15, the camera will perform the
watching action if there is no operation to
the camera in 15 seconds.
3 – Choose the action when the watch mode
is activated:
• Default Cruise: The camera will be continually rotated towards the left
• Preset Position: The camera will be moved to a selected preset position and stay.
• Line Scan: The camera will be implemented the Line Scan. See more on 5.1.4.1.2.4 Line Scan.
• Tour: The camera will be implemented the Tour. See more on 5.1.4.1.2.5 Tour.
• Pattern Scan: The camera will be implemented the Pattern Scan. See more on 5.1.4.1.2.6 Pattern Scan.
4 – Click
button to start the Watch Mode.
Press
button to stop.
5.1.4.1.2.4 - Line Scan
Line Scan allows the camera to automatically cruise between position A to position B horizontally.
1 – Select Line Scan mode.
2 – Adjust the speed control to alter how fast
or slow the camera will pan or tilt.
3 – Click and hold the directional buttons
to move the camera in the direction
selected.
4 – Change the optical zoom, focus and iris of
the lens if needed.
5 – When the first position is fixed,
click
button to record this position A.
Repeat step 3 & 4 to move the camera to
another position. Click
position B.
6 – Adjust the cruise speed.
7 – Click
button to start Line Scan.
Press
button to stop.
50
to record the
1
2
4
1
3
2
4
5
6
7
3
Advertisement
Table of Contents
