Eneo INR-18N040005A Full User Manual page 165

5.7.3.5 - Parameter Management
You can export the system settings to a USB flash drive, or import a system setting file from USB flash
drive to the NVR.
Save Settings: Click this button to export a
configuration file containing all the settings that
you have customized.
Load Settings: Click this button to import a
configuration file containing all the settings that you have customized.
5.7.3.6 - Auto Reboot
This menu allows the system to auto reboot the NVR regularly. It is recommended to leave this function
enabled, as it maintains the operational integrity of your NVR.
Auto Reboot: Tick to enable.
Time: You can set the NVR to reboot by day, week
or month.
5.7.3.7 - Developer Mode
This is an advantage feature on some certain models, which is used to acquire debug log for authorized
professionals when you report a defective complaint.
Telnet: This is used for an authorized technician
to connect to your NVR remotely. Please keep it
disabled unless you're required by an authorized
technician.
Debug Log: It is used for authorized professionals
to learn the system running status
• Disabled: Debug log won't be saved.
• Output to Terminal: Debug log will be outputted to terminal port.
• Output to Disk: Debug log will be saved to hard disk drive.
Export Debug Log: Export the debug log file from hard disk drive to your USB flash drive.
Delete Debug Log: Delete the debug file from the hard disk drive.
EN
165