Record - Eneo INR-18N040005A Full User Manual

5.2.2 - Record

This menu allows you to configure the recording parameters for each channel.
5.2.2.1 - Recording Configuration
Record Switch: Check to enable the recording in this channel.
Stream Mode: By default, your NVR will record both Mainstream and Substream video (known as
Dual-stream). Mainstream (high quality) video is used for playback when using your NVR directly, and
Substream (reduced quality) is used for remote playback on your mobile device. If remote playback is not
required, you can select Mainstream recording only to save your storage space.
Prerecord: Allows your NVR to record for several seconds before an event occurs. It's recommended to
leave this enabled.
ANR: Generally, videos are stored in the NVR when network connection is normal between the NVR and
cameras. With ANR (Automatic Network Replenishment) function, the camera would start continuous
recording and store videos in SD card instead when the connection is lost. Once the network is restored,
the video recordings will be sent back to NVR's storage. It is recommended to enable ANR if your camera
supports this function.
EN
63