Table of Contents
Advertisement
7.9.4 - PID & LCD
Click PID & LCD tab to enter the PID (Perimeter Intrusion Detection) & LCD (Line Crossing Detection)
event search section, if you have enabled the PID and/or LCD in camera(s), you will see the detection
events captured on current day.
1
2
1 – Click the calendar icon to select a date to search on. A red underline on a date indicates human
and/or vehicles were taken on those particular dates. For time, you can use the keypad to enter
a specific start and end time.
2 – Select the target type(s) you want to search for.
3 – Select PID and/or LCD in Vigilance.
4 – The system searches all channels by default. You can click the Channels button to select specific
channel(s) that you want to search for.
5 – Click Search button to commence a search.
6 – The search result will be displayed on the right side of the screen.
7 – You can change to display the images in ascending or descending order by time.
8 – Use the arrow buttons to turn page or use the keypad to navigate to a specific page.
9 – Click these buttons to change how the events are displayed. The default view is Thumbnail, but
you can change it to List or Detail.
10 – Tick the checkbox above each event to select it, or tick the checkbox of Select to select all
events in current page.
11 – Click backup button
to save video files also, tick the checkbox of Record, and then select the video format, adjust the
length of time before and after the events.
You can click play button
events, or click
to add time duration before
and after the event and then play. See more on
7.9.1.1. Playing Events.
3
7
4
5
Click on any one of the thumbnails,
its information will be displayed and
11
to copy all selected face images to your USB flash drive. If you want
to play the selected
its recording will be played�
10
6
8
9
EN
201
Advertisement
Table of Contents
