Table of Contents
Advertisement
4.1.2 - Date/Time
This menu allows you to configure the Date, Time, Date Format, Time Format, Time Zone, NTP and DST.
Date/Time
Click on the calendar icon to set the current system date.
Date: Click on the calendar icon to set the system
date.
Time: Edit the system time.
Date Format: Choose from the dropdown menu to
set preferred date format.
Time Format: Choose time format between 24Hour
and 12Hour.
Time Zone: Choose your time zone.
NTP
NTP stands for Network Time Protocol. This feature
allows you to synchronize the date and time
automatically on the NVR over Internet. Therefore,
the NVR needs to be connected to the Internet.
Tick the "NTP" box, and select the NTP server.
DST
DST stands for Daylight Savings Time.
Enable DST: Tick to enable if Daylight Saving Time
(DST) is observed in your region
Time Offset: Select the amount of time to offset for
DST
DST Mode: Choose to set the daylight-saving time
in weeks or in days
Start Time/End Time: Set the start time and end
time for daylight saving
20
Advertisement
Table of Contents
