Table of Contents
Advertisement
Motion Detection Area Setup: Click
1. The whole screen is marked for motion
detection (red blocks) as default.
Click Clear All to delete all the default
detection area.
2. To create a new detection area, press and
hold the left mouse button to select the cell
or square that you want to start at, then click
and drag to select the area that you want to
create. Release the mouse to finish.
3. Multiple areas can be created. Each cell or
square can be enabled to detect motion. The
same action also applies when deleting an
area.
4. Movement outside of the motion detection
areas won't be detected therefore will not
trigger recordings or event notifications.
5. Adjust the sensitivity if required, then right-
click the mouse to exit.
6. Click Apply to save changes made.
5.1.6.1 - Motion Alarm Settings
Click the Alarm button to change options for alarm notifications and more.
icon into the setup page.
EN
55
Advertisement
Table of Contents
