Figure 41 - Schedule - Settings (Advanced Mode) Setup Screen - Eneo DLR-2016/500V Operating Instructions Manual

Highlight the box under the Range heading and press the
recording will take place. The smallest time segment you can use is 15 minutes.
Highlight the box under the Mode heading and press the
Choose from: No Record, Time, Event and Time & Event. (Simple Mode Only)
When the DVR is in the No Record mode, it will not record during the preset day and time range as long as the
button is not pressed. Use the No Record mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode , the
and displays the icon at the top-left corner of the screen during the scheduled times.
When the DVR is in the Event mode, the red
and displays the icon at the top-left corner of the screen when any event occurs. When the DVR is in the Pre-Event
recoding mode, the yellow
in the Pre-Event mode, the red
When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the
top-left corner of the screen. The DVR follows the Event settings and the
Highlight the box under the Channels heading and press the
(Simple Mode Only)
Highlight the box under the Settings heading and press the
Figure 41 — Schedule – Settings (Advanced Mode) setup screen.
NOTE: Day, Range and Channels that are not defined will use the setting values of the previous schedule item.
When more than two schedule items are registered in the same day and time range, the DVR will follow the
latest registered schedule item.
When multiple events are detected at the same time from a specific channel, the DVR will record event
video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different
from each other. However, the ips will be reset to the supported maximum value when the ips, Quality,
Resolution and Dwell are all set to the highest value. (Advanced Mode Only)
Highlight the box under the
to confirm that you want to delete the settings.
Highlight Default... and press the
Highlighting boxes under Quality and pressing the
and Event recording. You can select from: Very High, High, Standard and Basic.
icon displays at the top-left corner of the screen. The DVR will record
icon displays at the top-left corner of the screen. The DVR will record
icon displays when there is no event, and the DVR is not recording. When the DVR is
and display when any event occurs and the DVR starts recoding.
You can set the ips, Quality and Resolution (ips, Quality,
Resolution and Dwell for Advanced Mode setup) of the
recording for any modes you set up in the Mode column. If
you do not set the ips, Quality, Resolution and Dwell in the
Settings column, the DVR will follow the default settings.
See below for details.
NOTE: Descriptions of the Record icons in the Type
heading and press the
button. The Default screen appears.
Highlighting boxes under ips and pressing the
allows you to set the images per second for Time and Event
recording. You can select from 1.00 to 30.00 ips (25.00 ips
PAL).
button allows you to set the recorded image quality for Time
16-Channel Digital Video Recorder
button to change the time range that the scheduled
button to change the recording mode that will be used.
icon displays.
button to select which cameras will be recorded.
button to define the recording settings.
column are as follows:
Time-lapse (Time)
Motion
Video Blind
button to delete the recording settings. You will be asked
PANIC
icon displays at the
Alarm-In
Video Loss
Text-In
button
35