Eneo INR-18N040005A Full User Manual page 212

6 – Live View Control Buttons
Switch display mode in the channel area.
Open all channel previews.
Close all channel previews.
Original proportions: The live video is displayed in the original proportions.
Stretch: The live video is stretched to fit the entire area of each channel on the screen.
The web client is enlarged to full screen.
Manual recording: Click this icon to start manual recording of all displayed channels. Click this icon
again to stop recording. The manually recorded video is stored on the computer.
Manual capture: Click this icon to capture the images of all displayed channels and store them on
the computer.
Digital zoom: Click an active image, and drag and drop the mouse to get an area on the active
image to zoom it in. Right-click the area to return to normal view.
Volume control: Adjust the volume by adjusting the level value.
Silence mode.
Intercom: Click this icon to enable the intercom between the client and the device. Click this icon
again to disable the intercom with the device. (Note: This function needs to be supported by the
device.)
White light control. White light deterrence can be enabled manually (camera support is required).
Alarm bell control. Alarm bell can be enabled manually (camera support is required).
Warning light control. Warning light alarm can be enabled manually (camera support is required).
Click this icon to add a custom tag event.
7 – Display tab switching
212