Table of Contents
Advertisement
1 – Click the calendar icon to select a date to search on. A red underline on a date indicates
snapshots were taken on those particular dates. For time, you can search over 24 hours or you
can use the keypad to enter a specific start and end time.
2 – Click Groups button, and then select the groups where your targeted face profiles are saved in.
3 – All face profiles exist in your selected
group(s) will be displayed in the display
window:
All face profiles are selected by default. You
can untick the checkbox of "Select All" to
deselect all.
Tick or untick the checkbox above each
image to select or deselect it.
If you want to delete a face profile, click on
the image, and then click the button
If you want to add more targeted face
images, click add button
face images from internal or external storage
device.
4 – If you have enabled the Face Attributes detection (5.4.1.1. FD), you can click here to appoint the
attribute(s) you want to search.
5 – Set the Similarity: Set how closely, in percentage terms, the detected face must match a
targeted face to be considered a recognized match. The default threshold is 70%. A higher
similarity % will result in fewer false recognition results.
6 – The system searches all channels by default. You can click the Channels button to select specific
channel(s) that you want to search for.
7 – Click Search button to commence a search.
8 – The face images that match your search criteria will be displayed. You can narrow your search
by selecting specific alarm group(s).
7.9.1.3 - Tracking Face
You can load a map and replace your cameras on the map. With the tracking function, you can easily
to see someone's appearance/ disappearance time & position in your appointed cameras, and his/her
movement track during the selected time period.
196
.
, and then select
Advertisement
Table of Contents
