Table of Contents
Advertisement
4. Newer version (with bigger digital sequence) is preferred to be selected due to its algorithm
optimization and database update.
5. Multiplex models with same version are
allowed & recommended to be enabled. This
would help to decrease the analysis loading
on a single NVR or camera and accelerate the
recognition.
6. If one or more selected cameras (not all)
are off-line, the recognition mission will be
automatically assigned to the rest of selected
camera(s).
7. When the Model is enabled on a single
camera and if the camera is off-line, the face
recognition will stop working. System will
send an alert notification shown as below.
Click OK to let the system automatically
select a new model. If you click Cancel, you
would need to configure the recognition
model by manual later.
8. If you want to change the model to a
different version, the system would send you
a notice, click OK to continue.
9. If the recognition model has been changed
to a different version, the system would
send you a notice, click OK to continue. If
you click Cancel, you would need to go to
Database Management menu and then click
Update facial features button to update the
database.
EN
103
Advertisement
Table of Contents
