Related Manuals for Eneo DLR3-08N/160CD
Summary of Contents for Eneo DLR3-08N/160CD
- Page 1 Operating Instructions Digital Video Recorder Models: DLR3-08N/160CD, DLR3-16N/160CD, DLR3-08N/410CD, DLR3-16N/410CD, DLR3-08N/660CD DLR3-16N/660CD...
-
Page 3: Safety Instructions
The DVR may only be operated indoors, and must be protected against ingress of water and moisture. Care of the DVR ► Never switch on the DVR when moisture has penetrated it. In such cases, have the DVR checked by a qualified service engineer. ►... -
Page 5: Table Of Contents
Front panel controls Key to controls Function buttons PTZ camera functions Playback functions Menu structure Getting started Checklist for DVR operation Switching on the DVR Accessing the Setup menu Switching off the DVR Administration Saving your system setup Loading your system setup... - Page 6 Table of contents Devices – Camera Devices – Audio Devices – Alarm-Out Devices – Display Devices – Remote Control Record – Record Record – Schedule Record – Pre-Event Event – Alarm-In Event – Motion Detection Event – Video Loss Event – Text-In Event –...
-
Page 7: Overview
Requirements for operation ● Digital video recorder DLR connected ● At least 1 camera connected ● At least 1 monitor connected ● Mouse connected, if DVR is to be controlled by mouse Control options ● Front panel ● Mouse ● RAS program... -
Page 8: Connections On The Rear
Connections on the rear Note: Connections optionally for NTSC or PAL operation. VIDEO IN 1 VIDEO IN 2 VIDEO IN 3 VIDEO IN 4 LOOP1 LOOP2 LOOP3 LOOP4 AI1 AI2 AI3 AI4 AI5 AI6 AI7 AI8 GND NO C NO NC NO ARI GND /RX+ /RX- TX+ TX- Designation... -
Page 9: Front Panel Controls
Front panel controls The following diagram and table shows the controls on the front panel of the DVR: Designation SPOT, SEQUENCE, CAMEO, DISPLAY, GROUP, PTZ, ZOOM, PLAYBACK, CLIP COPY MENU Menu navigation Connections PANIC ALARM 1 to 16 DLR-XXN/XX Function... -
Page 10: Key To Controls
Key to controls Function buttons Note: The secondary function assignment is accessed by holding down the key. Element Function Spot monitor assignments (secondary assignment) Sequence On/Off (secondary assignment) Cameo mode On/Off (secondary assignment) Switch image view modes (primary assignment) Switch displayed group (primary assignment) PTZ camera functions On/Off (secondary assignment) Zoom On/Off (primary assignment) Start playback... -
Page 11: Menu Structure
Menu structure The following diagram shows the menu structure: Display Sequence Freeze Zoom... PTZ... Spot Monitor... DLR-XXN/XX Camera Previous Group Next Group Edit Group Speed Auto Pan Tour Pattern Device Menu Light Pump Wiper Power Aux. Move to Origin Spot Monitor... Exit PTZ Spot Monitor 1 1. - Page 12 Menu structure, continued The following diagram shows the menu structure: Setup menu... Search System Network Devices Record Event Go to the First Go to the Last Go to the Date/Time... Calendar Search... Event Log Search... Text-In Search…. Motion Search... Clip-Copy... Zoom...
-
Page 13: Getting Started
Getting started Checklist for DVR operation Step Action Connect peripheral devices as per planned setup. Specify menu language.. Adjust date and time.. Set up user. Set up network and desired notification channels (optional). Register peripherals with DVR. Set up event types and associated responses. -
Page 14: Switching On The Dvr
Switching on the DVR Requirement: ● The start-up preparations are complete. Step Action Plug in DVR mains plug. Switch on monitor. Result: System starts up automatically and is ready to use.. Accessing the Setup menu Requirement: ● The DVR is switched on. -
Page 15: Administration
Insert a USB memory stick into one of the USB ports Export your setup. Specify a file name. Export your setup. Loading your system setup You can load your stored DVR system setup with or without its network configuration. Requirement: ● USB memory stick with stored setup Step Action Insert a USB memory stick into one of the USB ports. -
Page 16: Downloading Software Updates
Shut down the system. Disconnect the mains plug. Push a paper clip into the Reset button (on the rear of the DVR) and hold it there. Plug in the mains plug. Wait for all the LEDs to flash 5 times (about 30 seconds). -
Page 17: Determining The Memory Requirement Of A Recording
Administration, continued Determining the memory requirement of a recording The amount of memory recorded video sequences will take up depends on the following factors: ● picture quality ● number of images per second ● duration The memory requirement is calculated by this formula: Memory requirement = picture size x duration of recording x images per second Example calculation of CIF resolution (PAL): Picture... -
Page 18: Searching For Recordings
Searching for recordings Find first stored recording Search Go to the First… Find last stored recording Search Go to the Last… Find recording by date and time Search Go to the Date/Time... Calendar search For each camera the calendar search indicates: ●... -
Page 19: Using Calendar Search
Hours display ● White: Recording available If the date and time on the DVR have been changed (such as when switching to Summer time) there may be multiple recordings for one time from the same camera. They are stored in separate segments. -
Page 20: Using Event Log Search
Using event log search Performing an event log search Step Action Open event log search. Result: The result of the last search is displayed. Define criteria. Confirm input. Result: List of search results is displayed. Select desired entry from list. Search Event Log Search... -
Page 21: Using Text-In Search
Search > Text-In Search... Option... Search Option... Meaning Start date End date Text input devices on which to search for events Type of text input: Any Text-In Product Generic Text Epson Numbers of text elements to search for Text element Makes search case-sensitive... -
Page 22: Using Motion Search
Using motion search Performing a motion search Step Action Display desired camera in single frame. Open motion search. Enter settings for motion search. Confirm input. Result: List of search results is generated. Select desired entry from list. Search Motion Search... Term Symbol From First... -
Page 23: Copying Recordings
Copying recordings Copying recordings to CD or USB memory stick Step Action Find desired recordings. Note: Make a note of the data of the recordings you want to copy. Define settings. Start copying. Result: The recordings are copied. Search Clip-Copy... Term Symbol Data Source... -
Page 24: Menu Descriptions - Setup Menu
DVR via ● RAS (Remote Administration System), independent of Internet Explorer The DVR can be configured so that alarms trigger a notification by e-mail or notify an RAS. Devices menu On the “Devices” menu the connected peripheral devices are configured. Possible peripherals are: ●... -
Page 25: System - Information
Information Meaning Location of DVR ID for remote keypad ● The remote keypad and DVR must be set to the same ID. Menu language Version of DVR software Starts installing latest version of software via USB port Import setup Export setup... -
Page 26: System - Date/Time
Number of entered public holiday Date of each desired public holiday Date/Time Meaning Activates synchronisation with time server IP address of time server Synchronisation interval Time of last synchronisation Activates use of the DVR as the time server Date/Time Holiday Time Sync DLR-XXN/XX... -
Page 27: System - Storage
Setup menu, continued System – Storage On the “Storage” menu the status and usage of the available storage media is displayed. Setup menu... System Term Symbol Type Capacity Format Information Format Term Symbol Use as Partition Format Information Term Symbol From Clear DLR-XXN/XX... - Page 28 Setup menu, continued Setup menu... System Term Symbol Type Disk Bad Temperature S.M.A.R.T. Storage Status Meaning Memory type Data carrier status Temperature status Result of S.M.A.R.T. check DLR-XXN/XX...
-
Page 29: System - User
Auto Login Auto Logout Table of possible group access privileges Group access privilege Meaning Shutdown May shut down the DVR Upgrade May install a new firmware version System Time Change May change the time setting Data Clear May delete recording data... -
Page 30: System - Shutdown 0
Setup menu, continued System – Shutdown Setup menu... System System – Log out USER... Setup menu... System Network – Network On the “Network” menu all settings required to ensure network access are made. Setup menu... Network Term Symbol Transfer Speed Quality Shutdown... - Page 31 ● PPPoE) ● Password Note: Use of modem must not be activated. Address of DNS server Definition of port numbers needed to access the DVR via the RAS software Network Modem Meaning Enables modem use Note: LAN type ADSL must not be enabled.
- Page 32 DVRNS = Digital Video Recorder Name Service Port for DVRNS Enables NAT (Network Address Translation) use Name by which the DVR is to be registered with the DVRNS server Check DVR name for usability after entering Information from help desk if DVRNS setting correct...
-
Page 33: Network - Notification
Enables notification of an RAS via LAN Number of IP address IP addresses of RAS PCs Number of notification attempts by the DVR in the event of an error Enables notification of an RAS via modem Telephone number of the modem on the notified RAS PC Outside line code for external calls, if DVR’s modem is con-... -
Page 34: Devices - Camera 4
Setup menu, continued Devices – Camera On the “Camera” menu the cameras are configured. Setup menu... Devices Term Symbol Title Setup menu... Devices Term Symbol Product Port Setup… Camera Meaning Activates the cameras Name of camera Visibility of recordings and camera data depending on user access privileges: Normal All users see all camera data and all recordings... -
Page 35: Devices - Audio 5
Setup menu, continued Devices – Audio On the “Audio” menu the audio outputs are assigned to the cameras. Setup menu... Devices Term Symbol Associated Camera Enable Audio-Out DLR-XXN/XX Audio Meaning Number of audio output Assignment of camera Enables all audio outputs... -
Page 36: Devices - Alarm-Out 6
Meaning Number of schedule entry Day of the week Time range at 15-minute intervals Response in defined period: Continuous alarm Event Alarm in response to event No alarm Enable ● alarm outputs ● internal beep by DVR Settings Schedule DLR-XXN/XX... -
Page 37: Devices - Display 7
Transparency OSD Margin... DLR-XXN/XX Display Displayed symbol Meaning Visible when Zoom mode enabled Visible when DVR operating in a network ● Visible when freeze frame enabled ● Visible when Sequence mode enabled Displays number of groups, and their ID numbers ●... -
Page 38: Devices - Remote Control 8
Setup menu, continued Setup menu... Devices Term Symbol Mode Interval Event Monitoring On Setup menu... Devices Term Symbol Channels Devices – Remote Control On the “Remote Control” menu the remote control function is configured. Setup menu... Devices Term Symbol Port Setup…... -
Page 39: Record - Record 9
Setup menu, continued Record – Record On the “Record” menu the basic settings for recordings and their quality are made. Setup menu... Record Term Symbol Recycle Resolution Event Record Dwell Auto Deletion Use Panic Recording Panic Recording Duration Quality DLR-XXN/XX Record Meaning Enables automatic overwriting of the oldest recordings when the... -
Page 40: Record - Schedule
Setup menu, continued Record – Schedule On the “Schedule” menu the schedule for recording is defined. Setup menu... Record Term Symbol Schedule On Range Mode Channels Settings Default. Schedule Meaning Enables schedule entries Note: A recording is made only if schedule entries are enabled. Otherwise only panic recording is possible. -
Page 41: Record - Pre-Event
Setup menu, continued Record – Pre-Event On the “Pre-Event” menu the settings for recording prior to the event are made. Setup menu... Record Term Symbol Quality Dwell Time DLR-XXN/XX Pre-Event Meaning Activates the cameras Number of recorded images per second prior to the event Picture quality of the recorded images prior to the event Recording time prior to the event Note: The pre-event recording memory capacity is limited. -
Page 42: Event - Alarm-In
Setup menu > Record > Schedule Assign and enable alarm outputs internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup menu > Devices > Alarm-Out > Schedule... - Page 43 Setup menu, continued Setup menu... Event Term Symbol Spot Monitor DLR-XXN/XX Alarm-In Actions 2 Meaning Number of alarm input Select PTZ cameras to record in event of alarm and select the desired settings Select spot monitor on which camera image is displayed in event of alarm...
-
Page 44: Event - Motion Detection
Setup menu, continued Event – Motion Detection On the “Motion Detection” menu the motion-sensitive zones are defined and responses to events configured. Setup menu... Event Term Symbol Sensitivity Zone Min. Blocks Zone View Motion Ignoring Interval Daytime Setup Motion Detection Meaning Enables motion detection for the camera Sensitivity of motion detection:... - Page 45 Setup menu > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup menu > Devices > Alarm-Out > Schedule Assign and enable notifications:...
-
Page 46: Event - Video Loss
Setup menu > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup menu > Devices > Alarm-Out > Schedule Assign and enable notifications:... - Page 47 Setup menu, continued Setup menu... Event Term Symbol Spot Monitor DLR-XXN/XX Video Loss Meaning Number of covert camera Select PTZ cameras to record in event of alarm and select the desired settings Select spot monitor on which camera image is displayed in event of alarm Actions 2...
-
Page 48: Event - Text-In
Stop Bit Parity Type of text input: Generic Text Epson Character string with which text input must start for the DVR to respond DVR responds to any character Character string with which text input must end for the DVR to respond... - Page 49 Setup menu > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup menu > Devices > Alarm-Out > Schedule Assign and enable notifications:...
-
Page 50: Event - System Event
Setup menu, continued Event – System Event On the “System Event” menu the self-diagnostics and corresponding messages are configured. Setup menu... Event Term Symbol System Check Recording Check Alarm-In Setup Term Symbol Schedule On Range Interval Setup menu... Event Term Symbol Disk Bad Notify Disk Almost Full Notify... - Page 51 Disk S.M.A.R.T. S.M.A.R.T. check failed Assign and enable ● alarm outputs ● internal beep by DVR Note: Not possible for system event and panic recording Assign and enable notifications: Mail Modem (not in case of system event) LAN 1 to LAN 5...
-
Page 52: Event - Event Status
Panic Record Panic recording Check Recording On checking the recording On checking the data medium (only if DVR is not operating in Overwrite Disk Almost Full mode) On checking the data medium (only if DVR is not operating in Overwrite... -
Page 53: Specifications Dlr3-08N/Xx
Video output Audio input Audio output Resolution Compression method Recording speed DLR-XXN/XX DLR3-08N/160CD DLR3-08N/410CD 7192 71924 PAL/NTSC (auto detection) Unlimited number of entries for alarm/event/text messages, loss of signal Key locking, 64 user groups with programmable access (up to 256 users) - Page 54 Temperature range Housing Colour Dimensions (H x W x D) Weight DLR3-08N/160CD DLR3-08N/410CD Basic: 2/2.4 KB; Standard: 4/4.8 KB; High: 8/9.6 KB; Very high: 12/14.4 KB (NTSC/PAL). 2 times larger in High Resolution mode 160 GB ATA hard 410 GB ATA hard disk,...
-
Page 55: Specifications Dlr3-16N/Xx
Specifications DLR3-16N/XX Model EDP No. Video standard Remark Event logs Security against unauthorised Transmission rate Alarm triggering Alarm activation Remote control Text display interface Monitor display Covert camera mode Time synchronisation System change log Zoom function Playback Post-alarm recording Control interface Activity detection Simplex/Duplex/Triplex/Pen- taplex mode... - Page 56 Specifications DLR3-16N/XX, continued Model Picture size Hard disk capacity Playback speed Export of picture data Alarm inputs Alarm outputs Alarm reset Alarm messages Pre-alarm recording Recording medium Archiving Menu languages Ethernet port Remote software Ports Power Supply Power consumption Temperature range Housing Colour Dimensions (H x W x D)
-
Page 57: Accessories
Short description 71857 250GB hard disk for DLR/DXR/DTR and DCR 71919 500GB hard disk for DLR/DXR/DTR and DCR 74088 System keyboard with -axis joystick 74092 System keyboard with joystick, 5” monitor 71902 USB mouse for DVR series DXR, DLR DLR-XXN/XX... -
Page 58: Supported Ptz Cameras
Supported PTZ cameras Manufacturer Designation Costar CDC 2500 Dyna Color CDC2400 Chilsung CRD-J6416 Fine CRR-1660s Pelco D-protocol Dennard Dennard2060 Tokina DMP-122 Dongyang Unitech DRX-500 Dongyang DY-255RXC Sensormatic Delta Dome II/Ultra IV Eneo Fastrax Philips G Basic AutoDome LG Honeywell) GRU604A TK-S576 Sensormatic Ultra VI... -
Page 59: Index
Index Accessories 57 Alarm Configuring inputs 42 Configuring outputs 6 Connecting inputs 8 Connecting outputs 8 Motion detection 45 Resetting 9 Setting schedule for outputs 6 Setting signal duration 6 Ambient conditions , 54 Archiving Memory requirement 17 Assigning cameras Alarm-In 42 Motion detection 44, 45 Text-In 49... - Page 60 Index, continued Health check 50 IP address 1, 2 Network configuration 1 Memory requirement Archiving 17 Recordings 17 Memory type 27 Menu descriptions Search menu 18 Setup menu 24 Menu structure 11 Modem Network configuration 1 Monitor Configuring display 7 Configuring display sequence 8 Connecting 8 Motion search 22...
- Page 61 Index, continued Storage media Displaying status 27 Displaying usage 27 Setting automatic overwrite 9 Switching off 14 Switching on 14 System Exporting configuration 25 Importing configuration 25 Log out USER 0 Shutdown 0 System events Configuring 50 Health check 50 Text-in search 21 Time Setting 26...
-
Page 62: Notes On Disposal
Recycle the DVR in order to aid the sustainable reuse of material resources. Private users ► Contact the retailer from whom you purchased the DVR or your competent local authority to find out how you can recycle the DVR in an environmentally friendly way. Commercial users ►... - Page 64 eneo® is a registered trademark of Videor Technical E. Hartig GmbH Exclusive distribution through specialised trade channels only. VIDEOR TECHNICAL E. Hartig GmbH Carl-Zeiss-Str. 8 · 622 Rödermark, Germany Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100 www.videortechnical.com Operating Instructions version 08/2007 (V1.0) Subject to technical change without notice.