Motion Detection - Eneo INR-18N040005A Full User Manual

5.1.6 - Motion Detection

This menu allows you to configure motion parameters. When motion has been detected by one or more
cameras, your NVR will alert you to a potential threat at your home. It does this by sending you an email
alert with an attached image from the camera to use as a reference (if this option is enabled) and/or
sending push notifications via the mobile app.
Switch: Enable or disable motion detection.
Sensitivity: This option allows you to change the sensitivity level. The higher the number, the more
sensitive your NVR will be when detecting motion.
SMD by Recorder: Used for the cameras that do not support intelligent motion detection.
SMD by Camera: Used for the IP cameras that support intelligent motion detection.
There are four detection types available: Motion, Human, Vehicle, and Vehicle&Human.
• Motion: The camera will detect all motion events, including movements of human beings, vehicles,
animals, trees, etc.
If your camera or NVR supports smart motion detection (SMD), you'll be able to choose below advanced
motion detection targets:
• Human: The camera only alert when the movements of human beings are detected.
• Vehicle: The camera only alert when the movements of vehicles are detected.
• Vehicle & Human: The camera only alert when the movements of human beings and/or vehicles are
detected.
54