Table of Contents
Advertisement
Channel: to choose the channel you want to set.
Snap Mode: select how snapshots containing a
recognized face will be captured. This can affect the
number of facial recognition notifications that you will
receive:
• Realtime Mode: the camera tracks and captures
the face of someone entering and leaving the
facial detection area. You'll get two notifications in
the Alarm Notification Panel - once when the face
is first detected and again as the face leaves the
facial detection area. This is useful if you want to
continuously monitor someone's presence in an
area and get alerts in real-time.
• Optimal Mode: a single, best snapshot of the face is captured.
• Interval Mode: you can specify the number of snapshots to take and the time interval between
snapshots.
• Snap Num: the number of snapshots to take
• Snap Frequency: the time interval between snapshots
Apply Mode: There are three options available:
• Frontal View: the facial recognition engine is optimized to scan for faces approaching the camera
straight-on.
• Multi Angle: the facial recognition engine is optimized to scan for faces approaching the camera from
different angles.
• Customize: the facial recognition engine is optimized to scan for faces approaching the camera from
customized angles
• Roll Range: set the range of face rotation.
• Pitch Range: set the range of face pitch
• Yaw Range: set the range of face horizontal flipping
• Picture Quality: set the picture quality
• Frontal View Default: to load default values of front view
• Multi Angle Default: to load default values of multi angle view
Min Pixel: The minimum face size in pixels. The smaller the number of pixels, the more faces the camera can
recognize. If the camera is recognizing too many unwanted distant faces, try increasing the minimum pixel
value to train the camera to look for larger faces that are typically at a closer distance.
Max Pixel: The maximum face size in pixels. If you would like the camera to detect faces within proximity to
each other, try increasing the maximum pixel value, otherwise leave the default value.
Face Enhance: Face enhancement makes it easier to recognize the moving faces, but it may lower the
whole picture quality.
Face Attribute: Enable this function to detect gender, age, mask, glasses and facial expression.
Detection Mode: In Static Mode, all objects in the camera's field of view will be analyzed. In Motion Mode,
only moving objects will be analyzed.
EN
85
Advertisement
Table of Contents
