Eneo INR-18N040005A Full User Manual page 89

3. Choose one of the Rule Number. It is the number of PID area. Maximum 4 areas you can set for
PID function.
4. To enable the detection in Rule Switch.
5. Choose a Rule Type:
• A→B: Camera will only detect the action from side A to side B;
• B→A: Camera will only detect the action from side B to side A;
• A←→B: Camera will detect the action from either side B to side A or side A to side B.
6. Use your mouse to click 4 points in the camera image to draw a virtual region. The sharp of the
region should be a convex polygon. Concave polygon will be not able to save.
7. Click Save to save your settings.
8. If you want to modify the position or sharp of region, click the red box in the region, the borders
of the region will be changed to red color. Long press the left button of your mouse to move the
position of the region, or drag the corners to resize the region.
9. If you want to remove one of the regions from the camera image, click the red box in the region
and then click Remove button. Click Remove All will delete all regions.
10. If you want the green tracking frame that surrounds a detected object to be invisible during live
view mode and playback, then choose Disable in the Dynamic Marking.
5.4.1.4 - LCD (Line Crossing Detection)
Line Crossing Detection function detects people, vehicle or other objects which cross a pre-defined
virtual line, and some certain actions can be taken when the alarm is triggered.
Switch: To enable or disable the Line Crossing Detection.
Sensitivity: Adjust the sensitivity level. The higher the number, the more sensitive the detection will be.
Setup: Click
to configure the detection conditions.
EN
89