Eneo INR-18N040005A Full User Manual page 111

5.4.2.3 - License Plate Management
You're able to create and manage the vehicle license profile (database) to classify different vehicles into
different groups in order to quickly identify vehicles in remote and realize intelligent alarm beforehand.
There are 3 default groups:
• Allow List: Mostly used to define a list of vehicles that are regarded as acceptable or trustworthy.
• Block List: Mostly used to define a list of vehicles that are regarded as unacceptable or untrustworthy
and should be excluded or avoided.
• Unknown: All ungrouped vehicles will be identified as unknown vehicles.
You can click add button
If you want to make a backup of your database, use the Backup Database function to export it to your
USB flash drive. The exported database can be imported to the same or another NVR by using Import
Database function.
Tick the checkbox of Enable to enable the group. You would need to create vehicle license profiles (add
license number) to the groups in order to sufficiently exert the identification effects.
NOTE:
The maximum number to create vehicle license profiles in each group is 5,000.
5.4.2.3.1 - Create License Profiles from Local Storage Device
This section will show how to create vehicle profiles from license plate images that have been captured
and stored on your NVR.
1 – Click the Edit button
that you would like to create vehicle
license profiles for.
2 – Click the Import from Local button.
to create or click delete button
of the group
to delete customized group.
EN
111