Table of Contents
Advertisement
4.2.1 - Definitions of On screen Icons & Messages
Status Icons
Icon
Meaning
The camera is being recorded currently
A motion alarm is happening
An intelligent or Ai alarm is happening
The external I/O alarm device is being triggered
The PIR alarm is being triggered
HDD Error Icons
Icon
Meaning
HDD is uninstalled or in error
HDD is unformatted
HDD is full
HDD is read-only
4.2.2 - Camera Quick Toolbar
In live viewing, click the left button of your mouse on a connected camera to display the Camera Quick
Toolbar.
Icon
Meaning
Click to manually record the channel immediately. If the manually recording is in process, the icon will be in red color. Click one more time to
stop manual record.
Click to save a snapshot of the current camera image. Manual Capture must be enabled to use this feature.
For details on enabling Manual Capture, see 5.2.3.1 Capture.
Click to play the latest 5 minutes recording of this channel
Click to enter PTZ control panel;
Click to control zoom and focus of motorized varifocal lens
Click to zoom-in the channel. Scroll the wheel button of your mouse to zoom in and zoom out the image.
Click to adjust the image color of the channel.
To switch the live view video stream between HD & SD. HD is mainstream images, SD is substream images.
Click this button to enter fisheye mode. To use this button, device support is required and a fisheye camera should be connected first.
Click to start two-way voice communication
If your camera has white light LEDs, click this button to turn on or turn off the LEDs.
If your camera has a built-in speaker, click this button to turn on or turn off the alarm sound.
If your camera has warning light LEDs, click this button to turn on or turn off the LEDs.
Tag button. It supports to fast search by adding a tag in live view. See more on 7.5 Tag Search.
AI statistics. Hover the mouse upon the icon to view AI statistics when the AI function is activated in your NVR.
Channel Abnormal Message
Message
Meaning
No Camera
No camera is added to this channel. You can click the
add icon
to add a new camera.
Failed to
The added camera is off-lined or lost connection.
connect
Please check the camera working status or network
to camera,
connection. You can click the edit icon
please check
camera status.
the network
connection!
User name or
Incorrect user name or password of the camera. Click
password error!
the edit icon
Resource Not
No enough system resource to decode the camera
Enough
images, please try to change the cameras to sub-
stream mode;
If there are 2 or more cameras are using MJPEG
decoding, only 1 camera can be encoded at the same
time.
No enough
The camera cannot get online because the total
bandwidth for
bitrate of all connected cameras exceeds the NVR's
this camera!
bandwidth limitation.
to check the
to modify.
EN
27
Advertisement
Table of Contents
