Deterrence - Eneo INR-18N040005A Full User Manual

5.3.9 - Deterrence

This menu allows you to configure the action of built-in white lights (also known as "spotlights") and
speaker of the deterrence cameras when an alarm event is detected.
Setup: Click button to enter configuration page.
• Light: Click the drop-down menu to enable the
camera's white light.
• Light Brightness: For some certain cameras, you
can adjust the flood light value. The greater the
value, the brighter the light will be.
• Duration: This lets you change the length of
time the white light will remain lit when alarm is
detected. Adjust accordingly.
• Color Image: If enabled, the night vision images
will be turned to be colorful. If disabled, the night
version images will remain black & white.
• Deterrence Mode: Click the drop-down menu to
select a solid light (Warning Light) or a flashing
light (Strobe Light). When picking Strobe Light,
you can select a low, medium or high Strobe
Frequency setting.
• Warning Light: Click the drop-down menu to enable the camera's warning light.
• Warning Light Duration: This lets you change the length of time the warning light will remain lit
when alarm is detected. Adjust accordingly.
80