Eneo INR-18N040005A Full User Manual page 120

5.4.3.2 - AD (Attribution Detection) Alarm Settings
Attribute detection is a function to detect people's facial features and send an alarm according to the
settings.
Alarm Type: Select an alarm trigger condition:
• No Mask: When a person is detected not wearing a face mask, the NVR will send an automated alert
• Wear Mask: When a person is detected wearing a face mask, the NVR will send an automated alert
• Close: The face mask detection will be disabled.
NOTE: To enable the face mask detection function, you need to enable the Face Detection and Face Attribute function on
the camera. If want to get the alert in real-time, you would need to set the snap mode to be Real-time. view more on
5.4.1.1. FD (Face Detection).
Buzzer: When alarm event is detected, you can enable the NVR's buzzer to alert you for a predetermined
amount of time. Click the drop-down menu to select a time.
Alarm Out: If your NVR or IP camera supports to
connect external replay output devices, the system
can send an alert message to the external alarm
devices. Click button, to choose the external
alarm devices:
Local: External alarm devices connected to the NVR.
CHx->1: External alarm devices connected to IP cameras.
Latch Time: To configure the external alarm time when the detection is triggered.
Record: This option instructs your NVR to trigger additional cameras to start recording when motion is
detected. Click the drop-down arrow to choose all channels to be recorded or not.
Click button, click the Record Channel
checkbox to enable recording. Click the checkbox
in front of the channel number to select all
channels or click on the individual camera number
that you want to trigger for recording.
Post Recording: This option instructs your NVR to record for a set time after an event has occurred. For
most instances, the default selection will be suitable, however, you can change this if you wish.
Show Message: When the detection is triggered, the alarm icon
120
will appear on screen.