Eneo INR-18N040005A Full User Manual page 58

5.1.7.1 - PIR Alarm Settings
Click the Alarm button to change options for alarm notifications and more.
Buzzer: When PIR alarm is detected, you can enable the NVR's buzzer to alert you for a predetermined
amount of time. Click the drop-down menu to select a time.
Alarm Out: If your NVR or IP camera supports to
connect external replay output devices, the system
can send an alert message to the external alarm
devices. Click button, to choose the external
alarm devices:
Local: External alarm devices connected to the NVR.
CHx->1: External alarm devices connected to IP cameras.
Latch Time: To configure the external alarm time when the detection is triggered.
Record: This option instructs your NVR to trigger additional cameras to start recording when motion is
detected. Click the drop-down arrow to choose all channels to be recorded or not.
Click icon, click the Record Channel checkbox
to enable recording. Click the checkbox in front of
the channel number to select all channels or click
on the individual camera number that you want to
trigger for recording.
58