Table of Contents
Advertisement
5.3.2 - PIR Alarm
EN
Buzzer: When PIR is detected, you can enable the NVR's buzzer to alert you for a predetermined amount
of time. Click the drop-down menu to select a time.
Alarm Out: If your NVR or IP camera supports to
connect external replay output devices, the system
can send an alert message to the external alarm
devices. Click
button, to choose the external
alarm devices:
Local: External alarm devices connected to the NVR.
CHx->1: External alarm devices connected to IP cameras.
Latch Time: To configure the external alarm time when the detection is triggered.
Record: This option instructs your NVR to trigger additional cameras to start recording when PIR is
detected. Click the drop-down arrow to choose all channels to be recorded or not.
icon, click the Record Channel checkbox
Click
to enable recording. Click the checkbox in front of
the channel number to select all channels or click
on the individual camera number that you want to
trigger for recording.
Post Recording: This option instructs your NVR to record for a set time after an event has occurred. For
most instances, the default selection will be suitable, however, you can change this if you wish.
Show Message: When the detection is triggered, the alarm icon
will appear on screen.
Send Email: An email alert will be sent when alarm
event is detected. Tick the checkbox if you want to
disable this.
FTP Picture Upload: Click the checkbox to copy snapshots to your ftp server when the detection is
triggered.
FTP Video Upload: Click the checkbox to copy videos to your ftp server when the detection is triggered.
69
Advertisement
Table of Contents
