Table of Contents
Advertisement
5.1.4.1.2.2 - Preset Position
In this section, you're able to configure the preset positions. A preset position is a particular position
within the image that you would like the camera to focus on. Up to 255 different preset positions can be
created.
2
4
9
5
10
7
1
3
12
8
6
11
1 – Select PRESET mode.
2 – Adjust the speed control to alter how fast
or slow the camera will pan or tilt.
3 – Click and hold the directional buttons
to move the camera in the direction
selected.
4 – Change the optical zoom, focus and iris of
the lens if needed.
5 – When the position is fixed, change the
length of time (in seconds) the camera
will stay at this position, before moving to
the next position.
6 – Click the add button to create the preset
point.
7 – Repeat step 1 to 6 to add more preset
positions. The saved preset positions will
be displayed with blue background.
8 – Click the GO TO button
will then move to that selected position.
9 – Click Start Cruise, the camera will move
to the preset positions in sequence. Click
Stop Cruise to stop.
10 – You can give a name to the preset
position.
11 – You can delete the preset position by
clicking the Clear button
12 – Click the visual icon
see the thumbnail of preset position is
displayed on the bottom of the live view
image. You can go to, delete or add a
preset position in the visual interface.
EN
, the camera
.
, you will
49
Advertisement
Table of Contents
