Ddns; Email Settings - Eneo INR-18N040005A Full User Manual

5.5.2 - DDNS

This menu allows you to configure DDNS settings. The DDNS provides a static address to simplify remote
connection to your NVR. To use the DDNS, you need to create an account on the web page of DDNS
service provider firstly.
DDNS: Check to enable DDNS.
Server: Select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, CHANGEIP, DNSEXIT).
Domain: Enter the domain name you created on the web page of DDNS service provider. This will be the
address you type in the URL box when you want to connect remotely to the NVR via PC. Fox example: "nvr.
no-ip.org".
User/Password: Enter the user's name and password you obtained when creating an account on the web
page of DDNS service provider.
After all parameters are entered, click Test DDNS to test the DDNS settings. If the test result is "Network is
unreachable or DNS is incorrect", please check whether the network works fine, or the DDNS information is
correct or not.

5.5.3 - Email Settings

This menu allows you to configure the email
settings. Please complete these settings if you want
to receive the system notifications on your email
when an alarm is triggered, HDD becomes full, HDD
is in error state, or Video Loss occurs. Email is also
important when you need to reset your password.
134