Remote Access Through The Web Client; Basic System Environment Requirements; Web Plug In Downloading And Installation - Eneo INR-18N040005A Full User Manual

8 - REMOTE ACCESS THROUGH THE WEB CLIENT

You can use the web client on a PC to access the device remotely at any time. Before using the web client,
you need to ensure that the device network is normal.

8.1 - Basic System Environment Requirements

The minimum requirements for the hardware and operating system for running the web client are as
follows.
Item
CPU
RAM
Hard disk drive
Video memory
Display resolution
OS
DirectX
Direct3D
Ethernet adapter
Internet Explorer (IE) web browser
Firefox web browser
Google Chrome web browser
Apple Safari web browser
Edge web browser

8.2 - Web Plug in Downloading and Installation

To access the Web client, perform the following steps:
1. Open the web browser, enter the IP address
or "DDNS + port number" of the device in
the URL bar to open the user information
verification page. Then, enter the correct
user name and password to log in to the web
client. (If you enter an incorrect password for
consecutive five times, your account will be
locked for 180 s.)
206
Minimum Value
Intel® Core™ i5 CPU
≥ 4 GB
≥ 500 GB
≥ 2 GB
1280*1024
Windows 7 or above
Mac OS X®10.9 or above
DirectX 11
Acceleration Function
10/100/1000 M Ethernet adapter
Microsoft Internet Explorer (version: V11, V10)
V52 or above
V57 or above
V12.1 or above
V79 or above (using the Chromium core)
Recommended Value
Intel® Core™ i5 CPU or higher
≥ 8 GB
≥ 1000 GB
≥ 4 GB
1920*1080